This collar is known as the band collar. It stands up on the neck, closes with a button and buttonhole and is most often used on shirts and blouses. We’ll demonstrate how to draft the band collar and then how to complete your band collar pattern. Once you’ve learned how to draft this collar try our other collar lessons, the Peter Pan, the Convertible and the Sailor collar.
|1||Band Collar Draft||1-9|
|2||Band Collar Pattern||1-16|
MODULE 1 • Band Collar Draft
|1||For this lesson, you will prepare 1 piece of white unlined pattern measuring 16” (40.6cm) square.|
|2||You will also need your front and back neck measurement. We will refer to our Fitted Torso sloper to get those measurements. Measure the front neck from center front to shoulder and then measure the back neck from shoulder to center back.|
|3||Record these measurements on your white pattern paper on the upper left-hand corner of the paper block. We will record 3” (7.6cm) for our back neck and 4 ¼” (10.8cm) for our front neck measurement.|
To see the full transcript and complete video lesson, subscribe to the University of Fashion!
© 2008-2018 University of Fashion® – - Transcript for use with University of Fashion lessons only and not authorized for download or distribution