Single Fold Bias Binding – Edgestitch
Learn how to plan and sew a ¼” (6mm) bias binding with an edgestitch. Use this technique on necklines, armholes, or to clean finish a hem.
For additional lessons on sewing bindings view: Single Fold Bias Binding- Crackstitch, French Piping, Single-Fold Neck & Armhole Bias Binding. Hong Kong Bound Seam Finish and Hong Kong Hem Finish.
.
| Module | Description | Step |
|---|---|---|
| 1 | Lesson Prep | 1-3 |
| 2 | Sewing the Binding | 1-5 |
Full transcript is available if you subscribe.
MODULE 1 • Lesson Prep
| Step | Description |
|---|---|
| 1A | For this lesson, we have prepared two pieces of #2 muslin. One piece measuring 10” (25.4cm) in the width grain by 5” (12.7cm) in the length grain. This represents the body piece. |
| 1B | The second muslin piece will be a bias strip measuring 1 ¼” (3.2cm) wide by 12” (30.5cm) long. This is your binding. |
| 2A | Place the bias strip on your ironing board. Measure and turn up a ¼” (6mm) seam allowance along the length edge of the strip, using your clear plastic ruler. You could also mark the ¼” (0.6cm) seam allowance with your pencil. |
To see the full transcript and complete video lesson, subscribe to the University of Fashion!
© 2008-2018 University of Fashion® – - Transcript for use with University of Fashion lessons only and not authorized for download or distribution