Drafting a Square Neckline for Knits
This lesson will teach you how to draft a knit top with a square neckline. Referring to the illustration provided, you will learn how to determine the front neck drop measurement, the width of the square neck, the distance from the shoulder/neckline intersection, and the center back neck drop before you begin the draft.
The sleeveless knit T-shirt sloper needed for this lesson can be found and drafted in our lesson: Drafting a Women’s Fitted Stable Knit T-Shirt from Measurements. And the fabric planned for this draft is a cotton/Lycra single knit jersey.
For more lessons on working with cut & sew knits visit our Knit Discipline landing page.
| Module | Description | Step |
|---|---|---|
| 1 | Square Neck Draft | 1-5 |
| 2 | More About Knits | 1-2 |
MODULE 1 • Square Neck Draft
| Step | Description |
|---|---|
| 1 | We begin the draft by referring to our square neck sketch to determine certain key measurements. Our front neck drop is 4 ½” (11.4cm), the square neckline area from center front is 2 ¾” (7cm), the distance from the front and back shoulder/neckline intersection is ¾” (2cm) and the back neck drop is also ¾” (2cm). |
| 2A | Place a mark at 4 ½” (11.4cm) from the center front/neckline intersection and labeled it as ‘A’. Square off at A for 2 ¾” (7cm) and label it ‘B’.
From the front shoulder/neckline intersection, come out ¾” (2cm) and label that ‘C’. Now connect C to B to complete the front square neckline. |
To see the full transcript and complete video lesson, subscribe to the University of Fashion!
© 2008-2024 University of Fashion® – - Transcript for use with University of Fashion lessons only and not authorized for download or distribution