Drafting a Men’s Hoodie
In this lesson, you will learn how to draft a men’s shirt hoodie with a placket front and two inseam pockets, using the blocks that we created in our men’s shirt lesson.
In this lesson, you will learn how to draft a men’s shirt hoodie with a placket front and two inseam pockets, using the blocks that we created in our men’s shirt lesson.
| Module | Description | Step |
|---|---|---|
| 1 | Lesson Prep & Placket | 1-8 |
| 2 | Shirt Pocket | 1-3 |
| 3 | Drafting the Hood | 1-18 |
| 4 | Drafting the Collar Stand | 1-4 |
| 5 | Drafting the Sleeve & Cuff | 1-2 |
| Step | Description |
|---|---|
| 1 | Alright, our step number one is to trace our shirt, front and back for this step. As you can see, my shirt block is marked in regular pencil. Now, the blue lines, small dotted lines are my final pattern, my final block. |
| 2 | So, I am going to start right at the shoulder. As you’d recall in the shirt, our seam is more towards the front. But in this particular shirt hoodie, the seam sits right at the shoulder. So, we are going to cross out our original seam and move it back up 1” (2.5cm). so, this is crossed out. |
| 3A | Then, we come to our neck. We have a placket at the neck. So, we take ½” (1.3cm) in because we have a 1” (2.5cm) placket. So, we are going to cross this out as well. |
To see the full transcript and complete video lesson, subscribe to the University of Fashion!
© 2008-2018 University of Fashion® – - Transcript for use with University of Fashion lessons only and not authorized for download or distribution